ГлавнаяКаталогСЕТЕВОЕ ОБОРУДОВАНИЕWi-Fi Точки доступа CISCOWi-Fi Точки доступа Cisco WAPCisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Busi

Cisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Busi

фото Cisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Busi
артикул:
WAP351-E-K9
производитель:
CISCO
наличие:
под заказ
8320 грн
$320

Cisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Business-class AP


Specifications for Cisco WAP351 Wireless Access Point

Specifications

Description

Standards

IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Cabling type

Category 5e or better

Antennas

Internal antennas optimized for installation on a wall or ceiling

LED indicators

Power, WLAN, LAN

Operating system

Linux

Physical Interfaces

Ports

5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included)

Power Supply

802.3af/at PoE and External 48V/1.25A DC power adapter (not included)

Buttons

Reset button, Power On/Off

Lock slot

Slot for Kensington lock

Physical Specifications

Physical dimensions (W x D x H)

9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)

Weight

1.34 lb or 0.607 kg

Network Capabilities

VLAN support

Yes

Number of VLANs

1 management VLAN plus 16 VLANs for SSIDs

802.1X supplicant

Yes

SSID-to-VLAN mapping

Yes

Auto channel selection

Yes

Spanning Tree

Yes

Load balancing

Yes

IPv6

Yes

●  IPv6 host support
●  IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.

Layer 2

802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

Security

WPA/WPA2

Yes, including Enterprise authentication

Access control

Yes, management access control list (ACL) plus MAC ACL

Secure management

HTTPS

SSID broadcast

Yes

Rogue-access-point detection

Yes

Mounting and Physical Security

Multiple mounting options

Mounting bracket included for easy ceiling or wall mounting

Physical security lock

Kensington lock slot

Quality of Service

Quality of service (QoS)

Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Performance

Wireless throughput

Up to 300-Mbps data rate (real-world throughput will vary)

Recommended user support

32 active clients/users per radio

Multiple-Access Point Management

Single Point Setup

Yes

Number of access points per cluster

8

Active clients per cluster

240

Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

Yes

Event logging

Local, remote syslog, email alerts

Network diagnostics

Logging and packet capture

Web firmware upgrade

Firmware upgradable through web browser, imported/exported configuration file

Dynamic Host Configuration Protocol (DHCP)

DHCP client

IPv6 host

Yes

HTTP redirect

Yes

Wireless

Frequency

Dual concurrent radios (2.4 and 5 GHz)

Radio and modulation type

Dual radio, orthogonal frequency division multiplexing (OFDM)

WLAN

802.11n

2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz

2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz

20, and 40 MHz for 802.11n

PHY data rate up to 600 Mbps

Data rates supported

802.11a/b/g:

●  54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
●  802.11n: 6.5 to 300 Mbps
◦   20-MHz bandwidth: MCS 0-15 for supported data rates
◦   40-MHz bandwidth: MCS 0-15 for supported data rates

Frequency band and 20-MHz operating channels

A Regulatory Domain:

●  2.412 to 2.462 GHz; 11 channels
●  5.180 to 5.240 GHz; 4 channels
●  5.745 to 5.825 GHz; 5 channels

E Regulatory Domain:

●  2.412 to 2.472 GHz; 13 channels
●  5.180 to 5.240 GHz; 4 channels

 

C Regulatory Domain:

●  2.412 to 2.462 GHz; 11 channels
●  5.745 to 5.805 GHz; 4 channels

Nonoverlapping channels

2.4 GHz

●  802.11b/g
◦   20 MHz: 3
●  802.11n
◦   20 MHz: 3

5 GHz

●  802.11a
◦   20 MHz: 9
●  802.11n
◦   20 MHz: 9
◦   40 MHz: 4

Wireless isolation

Wireless isolation between clients

External antennas

None

Internal antennas

Internal Fixed PiFA Antenna

Antenna gain in dBi

Maximum antenna gain of 5.3 dBi on 2.4 GHz

Maximum antenna gain of 5.1 dBi on 5 GHz

Wireless distribution system (WDS)

Yes

Roaming

802.11i only

Multiple SSIDs

16

Wireless VLAN map

Yes

WLAN security

Yes

Wi-Fi Multimedia (WMM)

Yes, with unscheduled automatic power save

Operating Modes

Access point

Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

IEEE 802.3af/af Ethernet switch

Cisco Power Injector - SB-PWR-INJ2-xx

AC Adapter - SB-PWR-48V-xx (not included)

PoE power:

Peak PoE power: 18W

Compliance

Safety:

●  UL 60950-1
●  CAN/CSA-C22.2 No. 60950-1
●  IEC 60950-1
●  EN 60950-1

Radio approvals:

●  FCC Part 15.247, 15.407
●  RSS-210 (Canada)
●  EN 300.328, EN 301.893 (Europe)
●  AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):

●  FCC Part 15.107 and 15.109
●  ICES-003 (Canada)
●  EN 301.489-1 and -17 (Europe)

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

-20° to 70°C (-4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

System memory

128-MB RAM

128-MB Flash

Package Contents

●  CiscoWAP351 Wireless-N Dual Radio Access Point
●  Ceiling-/wall-mounting kit
●  User guide on CD-ROM
●  Quick-start guide
●  Ethernet network cable

Minimum Requirements

●  Switch or router with PoE support, PoE injector, or AC Power Adapter
●  Web-based configuration: Java-enabled web browser

Warranty

Access point

Limited lifetime

Cisco WAP351 Wireless-N Access Point RF Performance Table

 

Maximum Transmit Power (dBm)

Per Chain

Receiver Sensitivity (dBm)

Per Chain

2.4 GHz – 802.11b

1 Mbps

17.0 +/- 1.5

-91.0

11 Mbps

17.0 +/- 1.5

-89.0

2.4 GHz – 802.11g

 

6 Mbps

17.0 +/- 1.5

-93.0

54 Mbps

15.0 +/- 1.5

-75.0

2.4 GHz – 802.11n HT20

MCS0/8

17.0 +/- 1.5

-90.0

MCS7/15

14.0 +/- 1.5

-72.0

2.4 GHz – 802.11n HT40

MCS0/8

15.0 +/- 1.5

-88.0

MCS7/15

13.0 +/- 1.5

-69.0

5 GHz – 802.11a

6 Mbps

17.0 +/- 1.5

-91.0

54 Mbps

13.0 +/- 1.5

-73.0

5 GHz – 802.11n HT20

MCS0/8

16.0 +/- 1.5

-89.0

MCS7/15

12.0 +/- 1.5

-71.0

5 GHz – 802.11n HT40

MCS0/8

14.0 +/- 1.5

-86.0

MCS7/15

11.0 +/- 1.5

-67.0

       

Note:    This table shows the maximum capability of the hardware. The transmit power may be reduced to comply with local regulatory requirements.

Ordering Information for the Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch.

 

Part Number

Description

WAP351

Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch

WAP351-A-K9

Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch
(U.S., Canada, Mexico, Australia/New Zealand)

WAP351-C-K9

Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (China)

WAP351-E-K9

Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (ETSI)

SB-PWR-48V-xx

Cisco 48V Power Adapter

SB-PWR-INJ2-xx

Cisco Gigabit Power over Ethernet Injector-30W

Cisco Limited Lifetime Warranty for Cisco Small Business Products 

Cost-Effective Wired and Wireless-N Connectivity

Boost productivity with the Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch. This business-class access point offers 802.11n dual-radio connectivity and concurrent dual-band radios, and has a switch with 5 Gigabit Ethernet ports. The WAP351 is an ideal, lower-cost solution for hospitality, conference rooms, or classroom deployments.

Features and Capabilities

The WAP351 provides speeds up to 300 Mbps to help businesses increase productivity and run new business applications. The power-device (PD) port (power in) allows the access point to be powered by a backbone switch, and the power-sourcing-equipment (PSE) port (power out) allows the access point to power an IP device. The WAP351 advanced features will help simplify the deployment of wired and wireless devices.

Among its benefits, this access point:

  • Provides cost-effective dual-band 802.11n connectivity for 2.4-GHz and 5-GHz clients
  • Offers a 5-port GE for connecting multiple devices with PD and PSE support
  • Has a captive portal for highly secure guest access with customized roles and rights
  • Comes with a Limited Lifetime Hardware Warranty for peace of mind

Cisco WAP351 also simplifies deployment:

  • Offers single-point setup requiring no controller for easy, cost-effective deployment of multiple access points
  • Works right out of the box with easy installation and simple web-based configuration and wizard

Specifications at a Glance

  • Concurrent dual-band radio supporting up to 300 Mbps per radio for optimal capacity and coverage
  • Single Point Setup, a controllerless technology
  • Comprehensive security, including WPA2, 802.1X with RADIUS secure authentication, and rogue-access-point detection
  • Captive portal for highly secure, customized guest access
  • 5- Port Gigabit Ethernet LAN Switch supporting both PD and PSE, allowing IP devices and the AP to be powered by a backbone switch
  • Sleek design with multiple internal antennas and versatile mounting kit for installation on a ceiling, wall, or desktop
Быстрый заказ «Cisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Busi»